Aeotec by Aeon Labs ZW096 Smart Switch
Please note that according to the current Aeon Labs policy all their products have 12 month warranty from the date DELIVERED TO DISTRIBUTOR. Most likely your warranty period is much shorter or even expired.We DO NOT provide warranty service for Aeon Labs products anymore.
Aeotec by Aeon Labs ZW111 Z-Wave Nano Dimmer, Gen5 Protocol: Z-Wave Type: Dimmers & Switches
Aeon Labs ZW078-A,White,V3.26,US,AL001 Zw078-A Z-Wave Heavy Duty Smart Energy Appliance Switch, Small, White
Aeon labs heavy duty smart switch is a control and monitor device for heavy duty appliance and utilities. It can fully control your high powered appliances and services wirelessly or with an automatic Schedule. You can save money immediately with both its scheduling and energy monitoring features. You'll receive real-time reports of just how much electricity you are paying for. You?ll then be able to using scheduling and automatic controls to reduce the money you spend on the appliances that need up to 40 amps of power.
Aeotec by Aeon Labs ZW078-A Z-Wave Heavy Duty Smart Energy Appliance Switch, Gen5 Protocol: Z-Wave Type: Plug-in Module
Wireless on/off appliance control with real time energy monitoring;84% smaller than the first edition and 43% smaller than smart switch GEN5;USB port to charge your smartphone or tablet;Secure encrypted wireless technology;Z-wave certification Number:zc10-15050012
Aeon Labs DSC18103-ZWUS,White,US,AL001 Aeotec Z-Wave Micro Smart Energy Switch, 2nd Edition, White, Small
Aeon labs micro smart switch is a low-cost Z-Wave light dimmer specifically used to enable Z-Wave Command and control (on/off/dim) for existing in-wall switches. The wireless module is powered from the mains Supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status. The wireless protocol is based Z-Wave which provide a mesh network for commands to Hop from node to node for reliability.
The Aeon Labs Smart Energy Monitor is a low-cost energy monitor for the entire home. It can wirelessly report immediate wattage and kWh usage to central control point gateways such as the and can be easily and safely installed by anyone
Aeotec by Aeon Labs ZW116 Z-Wave Nano Switch with Power Metering, Gen5 Protocol: Z-Wave Type: Smart Energy Monitor
Aeon lab's touch panel for micro range is a series of elegant, touch sensitive switches that can be used as an accessory to control Aeon labs? range of in-wall, Z-Wave micro controllers. With their smooth glass fronts and brushed aluminium sides, each touch panel brings subtle, modern aesthetics to the humble wall switch and is capable of controlling individual appliances, lights or motors or entire Z-Wave scenes. Each switch in the touch panel for micro range is flat and does not recess into the gang box, thus leaving more room for the micro and a Neater installation.
The Aeotec Micro Smart Energy Illuminator G2 is a low-cost Z-Wave dimmer module specifically used to enable Z-Wave command and control (on/off/dim) of existing in-wall switches. It can also report immediate wattage consumption or kWh energy usage over a period of time. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the unit's operating status. It also is a repeater in the Z-Wave network. Acting as a bridge for communication, it will forward Z-Wave command messages to their destinations if the originating controller is out of range from the destination node. By taking advantage of the Z-Wave mesh network, commands can be routed to their destination via intermediary "listening" Z-Wave products. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices.
Aeotec by Aeon Labs ZW096-A Z-Wave Smart Switch 6, Gen5
Micro Dimmer turns an existing on/off or momentary switch into a Z-Wave dimming switch. Dimmable lights enabling Z-Wave command and control. The Micro Dimmers G2 are only compatible with these LED bulbs: - No Transformer or LED drivers connected in between - Leading Edge / TRIAC Dimmable bulbs - 100 - 220VAC input required for LED bulbs Neutral (White wire) Note! If this wire is not present in the box, a neutral wire must be pulled into the box.
Aeotec by Aeon Labs ZW139 Z-Wave Nano Switch, Gen5 Protocol: Z-Wave Type: Smart Energy Monitor
Smart plug. Convenient plug. There's smart. There's convenient. Smart Switch 6 is both. We live in an age of USB charging, so Smart Switch 6 offers it. Discretely crafted into the design, Smart Switch 6 offers side-port charging of smart phones and tablets.
2-Pack;Z-Wave Plus certified for wide compatibility;LED ring changes color to reflect On/Off status or energy usage;Reports energy usage in kWh or Watts accurate to 99 percent;USB port (1.5A) on side of switch charges USB devices
The perfect balance between design, size, features and safety, smart switch 6 is now 84% smaller than aeotec?s smart energy switch. That's not just the minification of smart switch, but a complete re-engineering and re-imagining. Smart switch 6 can power devices that draw up to 15 amps of power. But safety comes first, so a different smart switch 6 has been engineered for every country it?s available in, ensuring that it?s never overpowered and never unsafe. Your expensive Electronics are safe with smart switch 6 courtesy of its inbuilt surge protector and over-current protector.