The GoControl Wall Mount Dimmer Switch (Z-Wave) lets you remotely dim and turn on or off all connected permanently-installed light fixtures by simply replacing your current wall-mount switch with the GoControl Smart Dimmer Switch. With a capacity of up to 500 watts, the switch lets you control permanently installed fluorescent, halogen, and LED lighting. The dimmer uses your Z-Wave network to control the operation and brightness of any associated lights, and supports the Association command class to control other Z-Wave devices. The Dimmer Switch also acts as a repeater to extend the reach of your Z-Wave network by up to an additional 130 feet.

Controls Z-Wave-Enabled Lights and Their Brightness
The GoControl Wall Mount Dimmer Switch (Z-Wave) lets you remotely dim and turn lights on and off using your Z-Wave controller/hub or its remote app. Use your Z-Wave controller (sold separately) to operate this smart dimmer switch to enjoy versatile and energy-saving lighting control anywhere.

Replace Any Standard Light Switch With This Smart Dimmer Switch
Because the GoControl Wall Mount Dimmer Switch (Z-Wave) is controlled via your Z-Wave network, you can install it anywhere that power is available. The switch has a capacity of up to 500 watts for permanently installed fluorescent, halogen, and LED lighting. It is not to be used for control of receptacles. It requires a neutral connection for installation.

Customize Color with Replaceable Trim Ring
This dimmer has a replaceable trim ring, so you can change its color with the Trim Ring Kit in black, brown, and almond (all sold separately).

Works as a Repeater for Your Z-Wave Network
For this dimmer to work with your network, it must be within approximately 130 feet (via line of sight) from your Z-Wave Controller or the closest Z-Wave Repeater. However, this dimmer also works as a repeater, extending your network up to an additional 130 feet via line of sight to reach other elements of your Z-Wave network that would otherwise be out of range of the hub or controller.

Compatible with All Other Z-Wave-Certified Products
Like all Z-Wave-certified products, the GoControl Wall Mount Dimmer Switch (Z-Wave) is compatible with other Z-Wave devices, including those made by other manufacturers. The GoControl family of Z-Wave products also includes switches, dimmers, outlets, thermostats, light bulbs and lighting retrofit kits and plug-in modules as well as security devices, including alert sounders, passive infrared motion detectors, and door/window sensors.

About Z-Wave Technology
Z-Wave smart chips enable two-way RF communication among hundreds of Z-Wave-enabled devices using the Z-Wave international wireless standard. Thanks to the cross-manufacturer compatibility of Z-Wave products, it is simple to set up systems that include security, energy management, home entertainment, and appliances. Z-Wave products operate at the standard 908.42 MHz frequency and support network-wide inclusion. They are security system compatible.

Get Your Linear Z-Wave Wall-Mount Dimmer Switch Now!

“This is my first Z-wave product. It installed easily in my network with a VeraPlus controller (I used two taps on the switch as advocated by other reviewers) and it has worked perfectly since then controlling some Philips LED’s.”

Get The Smart Home Guide Now!

Get your FREE copy of the Smart Home Guide by signing up for our newsletter. The Smart Home Guide is a 45 page ebook created here at GetSmartHomeDevices.com to provide you an overview of the best selling smart home devices from the most popular smart home brands. Think of it as an introduction to home automation that you can save to reference smart home solutions such as lighting, thermostats, security, and more.